Hi All, I will do a detailed write-up on constructing/testing this board when mine arrives. For those wanting to get an early start, a reminder, be sure to use a mica insulator between the 5V regulator and the board (or as a last resort a pair of small washers) . You do not want the traces in that areaon the front of the board touching the heat sink/ground. John John Monahan Ph.D e-mail: <mailto:monahan at vitasoft.org> monahan at vitasoft.org Text: <mailto:monahan at txt.att.net> monahan at txt.att.net From: n8vem-s100 at googlegroups.com [mailto:n8vem-s100 at googlegroups.com] On Behalf Of Andrew Lynch Sent: Sunday, October 13, 2013 6:31 AM To: n8vem-s100 at googlegroups.com Cc: cctalk at classiccmp.org Subject: [N8VEM-S100:1971] S-100 80286 CPU PCBs have arrived! Hi! The S-100 80286 CPU PCBs have arrived and I have shipped all the pre-ordered boards. The boards look great and the order has been a huge success! There are only two (2) boards left in case anyone wants one. I am really looking forward to the first reports of the S-100 80286 CPU boards "in the wild". This is going to be fun! I hope you enjoy your new CPU boards! Thanks and have a nice day! Andrew Lynch -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+unsubscribe at googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.