I have already responded to Bernd, but thought I should pass the info here. I have the whitepaper for this particular board, but nothing else. According to the paper, it is B004 compatible (most if not all PC boards are), so the software on the website *should* work. Here is the link to the whitepaper: http://www.classiccmp.org/transputer/documentation/yarc/yarc.doc Cheers, Ram PS: As a side note, what is a good way to scan documents in such a way as that the resulting PDF document can resize as large as possible without loosing image quality. Word documents can resize as large as possible without image loss. I hate putting word docs on the website.... -----Original Message----- From: Thilo Schmidt To: cctalk(a)classiccmp.org Sent: 12/5/02 6:31 PM Subject: Re: YARC Systems transputer board Hi Bernd, On 05-Dec-2002 Bernd Kopriva wrote: Ah, I saw this board on Ebay... :-) ... This is a common problem with transputer based hardware... No, but most PC-Transputer-Boards where compatible to the Inmos B004 interface. On Ram's Transputer Homepage you should find a lot of software for this interface (http://www.classiccmp.org/transputer) I'm writing a Linux based development environment for transputers. Currently only the B004 driver and the assembler are operational. If you find any useful information regarding the interface of your board I would be very interested... bye Thilo