Not sure but subscribe to comp.sys.tandy and ask there ********** Kevin Parker Web Services Manager WorkCover Corporation e: webmaster(a)workcover.com w: www.workcover.com p:+ 61 8 8233 2548 f: +61 8 8233 2282 m: 0418 806 166 ********** -----Original Message----- From: Bob Brown [mailto:bbrown314@comcast.net] Sent: Monday, 29 December 2003 2:18 PM To: cctech(a)classiccmp.org Subject: getting trs-80 basic programs into pc text files (hp2000 programs) Now that I've been able to rescue some apple-II based hp2000 programs hp2000 emulation, I turn my attention to my large archive of trs-80 based archives. I took hp basic programs, downloaded them into my trs-80 (saved them as basic code..of course it wouldn't run on the trs-80, but the trs-80 would hold the code just fine)...these are on cassette. I know that several emulators for the trs-80 can take cassette input..what I'm looking for is a path to get the programs loaded from cassette with the final destination being a pc text file which I can then easily upload into my virtual hp-2000. Any ideas? thanks! -Bob ************************************************************************ This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender cannot warrant that this e-mail or any files transmitted with it are free of viruses or any other defect. If you have received this e-mail in error, please notify the sender immediately by return e-mail and destroy the original e-mail and any copies. ************************************************************************