Andrew, The douglasgoodall website required a log in before viewing. Status posted anywhere else? Thanks Rob -----REPLY----- Hi You can check the N8VEM wiki for schematics, PCB layout, and parts list. http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder <http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=S-100%2068K%20 CPU> &param=S-100%2068K%20CPU Otherwise the status of the S-100 68K CPU board is we've got a team of builders schematic captured & reviewed PCB layout done and verified 5 PCB prototypes ordered prototype PCBs sent to builders lead builder is currently doing build and test project wiki set up various pieces of TUTOR 1.3 software gathered We are not done with build and test. No ETA. There are some minor changes and items found so far but nothing of consequence. No cuts and jumpers identified for the board. After prototype build and test is done, we are going to focus on the software. Probably custom test/debug/monitor EPROMs first, then TUTOR 1.3 with a goal of CP/M 68K (maybe) The plan is the PCBs will be available for $20 each plus shipping. They are for educational purposes only. No kits or pre-built boards. There is no ETA for the manufactured PCBs. That's about it. Thanks and have a nice day! Andrew Lynch