U don't need a manual! There are two isa bays One could fit a ide board for a second hdd or what I have a scsi board for the scsi cd The other goodies in it are a bigger videomemory for 800x600 display To open, all u need is the two screws right hand side in the back....slide out the left side panel so u gget access to the bay. Not muck with the key. Pop the fdd bezel unless u want a second hdd in there U can also have a second ide cdrom in there, just remember to set the jumpers so as to disable the first ide port! Ur bios on the t4800 should be 5.0 for sure. As to scsi setups, I haven't been able to recognize all scssis on all my t46-49x'es....i be darned if someone can help me out there, but the regular win98 bootdisk doesn't recognize my scsi cdroms....suse linux does! Fred -----Original Message----- From: owner-classiccmp(a)classiccmp.org [mailto:owner-classiccmp@classiccmp.org] On Behalf Of pb(a)Colorado.EDU Sent: Monday, 21 January, 2002 11.32 To: classiccmp(a)classiccmp.org Subject: Wanted: manual for Toshiba T4800CT docking station Hi. I'm wondering if anyone has any documentation for the docking station for a Toshiba T4800CT laptop. I'm embarassed to admit that I can't even figure out how to access the drive bay on the station. For those of you with extensive collections (or access to extensive documentation libraries), the part number for the docking station is PA2701U, and it's called a "Desk Station IV." Thanks in advance. PB Schechter