Okay, VAX heads. I got an external SCSI cable for my VAXstation 3100 M76 and connected it to my old Apple SCSI CD-ROM that boots pretty much anything in my collection (Apple, SGI, you name it). At the chevron prompt, -DKB500 [...] OpenVMS (TM) VAX Version X7G7 Major version id = 1 Minor version id = 0 [...] PLEASE ENTER DATE AND TIME (DD-MM-YYYY HH:MM): 13-JAN-2013 16:14 [...] %SYSTEM-I-MOUNTVER, DKB500: is offline. Mount verification in progress. It just sits there. So I tried it without the /r5 bit: -DKB500 [...] OpenVMS (TM) VAX Version X7G7 Major version id = 1 Minor version id = 0 [...] PLEASE ENTER DATE AND TIME (DD-MM-YYYY HH:MM): 13-JAN-2013 16:20 Configuring devices . . . Available device: DKB500: device type SONY CD-ROM CDU-8 Available device: DKA0: device type RZ26 %BACKUP-I-IDENT, Stand-alone BACKUP V7.2; the date is 13-JAN-2013 16:21:06.64 $ So far so good. $ BACKUP/IMAGE/VERIFY DKB500:VMS073.B/SAVE_SET DKA0: %SYSTEM-I-MOUNTVER, SABKUP$DKB500: is offline. Mount verification in progress. And sits there again. What am I doing wrong? (Don't say use another CD-ROM drive; this one works perfectly with every other computer I've used it with. And why would it boot from it but not install from it?) -- ------------------------------------ personal: http://www.cameronkaiser.com/ -- Cameron Kaiser * Floodgap Systems * www.floodgap.com * ckaiser at floodgap.com -- Twenty-four hours in a day, twenty-four cans in a Pepsi cube. Coincidence? -