Hello all, As promised, here is the list of EXORbus cards that I have... Any docs or information on these would be greatly appreciated! (Thanks to Mike and Joe for already replying to my previous post)... 1 MEX68WW Wire-Wrap prototyping Board (uh, well, I guess this one is self-explanatory :-) ) 1 CMS 9601-501 "Utility Buffer/Cable Breakout" Board (2 ports) 1 CMS 9601-503 "Cable Breakout" Board (8 ports) 2 Chrislin Industries memory board -- 32 4116 chips 2 Motorola Micro Module 1A (one has 4 2708 EPROM's, labels all faded) 2 CMS 9650 Serial I/O Board (8 8650 chips) 2 card extenders w/ test points 1 Micro-Logus P-VDG board (CRT-5037 and CRT 8002 chips, also 4 2016's, and 4 output jacks, coaxial, but smaller than say a cable TV coaxial cable. Also output jacks are NON-threaded. 1 CMS 9609 MPU board (6809, 2 6821's, 2 6850's, 3 2716 EPROM's, one marked "Debug 09", others unlabeled) 1 CMS 9609 MPU board (same setup as above, but 3 2716's marked "M9M17 #1, #2, and #3") 1 Southern Company Services SCSEVDG183, very similar to P-VDG board above, but w/ CRT-5027, and 4016's instead of 2016's) 1 Hodge Taylor and Associates P/N 040478 (all 74XX logic, no ideas as to function) 1 Hodge Taylor and Associates P/N 033178 (again, all logic...) 1 unknown vendor, marked "Interface Board" (2 6820's, 2708 EPROM, marked "D800" (very faded), 40-pin and 50-pin connectors on top) 1 General Micro Systems "Versatile Memory Module" (16 sockets, 9 filled w/ 2716 EPROM's, marked "IRCS 0.64" -- Also has battery backup!) 1 CMS 9640 Timer Board 1 Hodge Taylor and Associates P/N 12877 (2 AM2901BDC, 3 AM2909PC, 4 N82S2708N) Thanks in advance! Rich B.