Well, I'm not pete, but the process is quite simple: Take out your board, and look at the RAMs - near the left Chip you'll notice markings and drilled plated thru holes which exactly resembles the 6116 - the left 2114 is located halfways in that area - unsolder the 2114s and solder in the 6116 - although I recomend soldering a socket, so you may play around with other 6116 compatible modules, like batery buffered RAMs or the RAM/clock combination from Dallas. IMHO a real good add on if you intend to keep a minimal system. Gruss H. -- VCF Europa 3.0 am 27./28. April 2002 in Muenchen http://www.vcfe.org/