Hello all, I would be extremely grateful if those of
you with VAX
11/750s out there could either take pictures or draw diagrams of
how the
PSU blocks are connected in this wonderful system.
You have the printsets. You'll find that in addition
to the schematics, they also include (almost)
enough information to build the PSU from
scratch.
If you have The Installation Manual (there are
several, two of which you can find at
http://208.190.133.204/decimages/moremanuals.htm
... except it's still down...) specifically EK-SI75F-IN-001
has some pictures on pp1-18, 2-1
The printset is probably a better guide!
I have (finally) received my first piece of Big Iron
but it has
death of
the 2.5v PSU, and all the PSU bricks were removed and
handed to me
before I could note their positions.
Oddly enough, the last one I saw had
exactly the same problem. The 2.5V
PSU was not regulating properly.
Also, if any of you have a terminal
going spare (vt or hardcopy, either
ist gut) then shout out and we can talk...
I don't have one spare, but people who
do might want you to pin down your
location a little ...
Antonio