20 Nov
2021
20 Nov
'21
11:11 a.m.
Hey everyone!
Has anyone been able to use a SCSI2SD setup where HVD is required? I
know by default that isn't supported, but given we can get custom kits
to solder, we could just change out one of the controller chips
(optimistically?)
Cheers!
--
-Jon
+44 7792 149029
20 Nov
20 Nov
12:01 p.m.
On 11/20/2021 11:11 AM, Jonathan Katz via cctalk wrote:
Hey everyone!
Has anyone been able to use a SCSI2SD setup where HVD is required? I
know by default that isn't supported, but given we can get custom kits
to solder, we could just change out one of the controller chips
(optimistically?)
Cheers!
I'd think you could get one of the DEC or Pacific data converters to
handle that.? They work well converting to SE anyway.? Are the SCSI2SD
proper SE or LVD only?? Some SCSI don't do the SE voltage version
properly, just the LVD.
DEC sold Pacific data converters with a DEC logo on them.
thanks
Jim
12:51 p.m.
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of jim stephens via
cctalk
Sent: 20 November 2021 20:02
To: Jonathan Katz via cctalk <cctalk at classiccmp.org>
Subject: Re: SCSI2SD for HVD?
On 11/20/2021 11:11 AM, Jonathan Katz via cctalk wrote:
Jim,
SCSI2SD is old traditional SCSI so single ended
Dave
Hey everyone!
Has anyone been able to use a SCSI2SD setup where HVD is required? I
know by default that isn't supported, but given we can get custom kits
to solder, we could just change out one of the controller chips
(optimistically?)
Cheers!
I'd think you could get one of the DEC or Pacific data converters to handle
that. They work well converting to SE anyway. Are the SCSI2SD proper SE or
LVD only? Some SCSI don't do the SE voltage version properly, just the LVD.
DEC sold Pacific data converters with a DEC logo on them.
thanks
Jim
895
days inactive
895
days old
2 comments
3 participants
participants (3)
-
dave.g4ugm＠gmail.com -
jon＠jonworld.com -
jwsmail＠jwsss.com