28 Apr
1999
28 Apr
'99
2:48 a.m.
Ok, I booted a disk labelled "HT-11B distribution" on my H-11 and it comes
up to the "." prompt. But not much else. (dir doesn't work for example)
Is there a clue page somewhere ?
--Chuck
28 Apr
28 Apr
7:11 a.m.
As a test you could use the command 'sh all',
it will show all the
available H/W and options installed.
Doubtful... RESORC (the program which handles the SHOW command)
didn't come along until later... and neither did DCL, which is
how RESORC would have been called.
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
7:35 a.m.
On Wed, 28 Apr 1999, Chuck McManis wrote:
Ok, I booted a disk labelled "HT-11B
distribution" on my H-11 and it comes
up to the "." prompt. But not much else. (dir doesn't work for example)
same page you would use for RT-11 (its essentially rt-11 V2). HT-11 would
have to have dup, dir, resourc and a few other utilities on it do be useful.
Allison
7:48 a.m.
Chuck McManis wrote:
Ok, I booted a disk labelled "HT-11B distribution" on my H-11 and it comes
up to the "." prompt. But not much else. (dir doesn't work for example)
Is there a clue page somewhere ?
--Chuck
As a test you could use the command 'sh all', it will show all the
available H/W and options installed.
Ed
7:16 a.m.
Chuck McManis wrote:
I believe HT11 was based on RT11 v2b... It didn't have dcl
or a lot of the stuff from the later RT11.
Bill
---
bpechter@shell.monmouth.com|pechter@pechter.dyndns.org
Three things never anger: First, the one who runs your DEC,
The one who does Field Service and the one who signs your check.
Ok, I booted a disk labelled "HT-11B distribution" on my H-11 and it comes
up to the "." prompt. But not much else. (dir doesn't work for example)
Is there a clue page somewhere ?
--Chuck
As a test you could use the command 'sh all', it will show all the
available H/W and options installed.
Ed
9377
days inactive
9377
days old
4 comments
5 participants
participants (5)
-
allisonp＠world.std.com -
cmcmanis＠mcmanis.com -
mbg＠world.std.com -
pechter＠pechter.dyndns.org -
wanderer＠bos.nl