20 Jun
2012
20 Jun
'12
2:02 a.m.
anyone got one of these they would be interested in parting with
i've got a heathkit h11 lsi-11 to plug it into witch curently has rl02
hooked up to it
and posibly a controllor for a pertec t6b40-9-45 9 track drive?
the pertec drive in question
http://bitsavers.org/pdf/pertec/tape/100884_T6x40-T6x60_Sep78.pdf
i need it for this rack of stuff
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160748462238&ssP…
Adrian
location Winnipeg canada
20 Jun
20 Jun
3:44 a.m.
I have a plessy and RK11-d for the unibus, and a RK8-E for the
omnibus. I might have an RKV11-D, but will have to find it. These are
very uncommon.
On Wed, Jun 20, 2012 at 1:02 AM, Adrian Stoness <tdk.knight at gmail.com> wrote:
anyone got one of these they would be interested in
parting with
?i've got a heathkit h11 lsi-11 to plug it into witch curently has rl02
hooked up to it
and posibly a controllor for a pertec t6b40-9-45 9 track drive?
the pertec drive in question
http://bitsavers.org/pdf/pertec/tape/100884_T6x40-T6x60_Sep78.pdf
i need it for this rack of stuff
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160748462238&ssP…
Adrian
location Winnipeg canada
4:03 a.m.
and how uncomon are the Qbus ones?
i've got the omibus pdp8a with the rk8e but its kinda useles with out the
card jumpers and cables
2:20 p.m.
On Wed, Jun 20, 2012 at 3:03 AM, Adrian Stoness <tdk.knight at gmail.com> wrote:
and how uncomon are the Qbus ones?
I would believe that the RKV11 is the rarest of the three.
i've got the omibus pdp8a with the rk8e but its
kinda useles with out the
card jumpers and cables
The green cubes that connect the tops of the cards together?
The cable that goes from the RK8E to the first drive? If you have a
unibus cable (BC11A)
That is damaged on one end, or even a good one, you should be able to
cut off one end and adapt it to the controller.
Paul
2:31 p.m.
yes the green cubes
On Wed, Jun 20, 2012 at 1:20 PM, Paul Anderson <useddec at gmail.com> wrote:
On Wed, Jun 20, 2012 at 3:03 AM, Adrian Stoness
<tdk.knight at gmail.com>
wrote:
and how uncomon are the Qbus ones?
I would believe that the RKV11 is the rarest of the three.
i've got the omibus pdp8a with the rk8e but
its kinda useles with out the
card jumpers and cables
The green cubes that connect the tops of the cards together?
The cable that goes from the RK8E to the first drive? If you have a
unibus cable (BC11A)
That is damaged on one end, or even a good one, you should be able to
cut off one end and adapt it to the controller.
Paul
2:49 p.m.
If you can find a Emulex or Dilog part number for the controller, I'll
see what I have.
I should have a few of the over the top connectors somewhere, but what
cable do you need?
Paul
On Wed, Jun 20, 2012 at 1:31 PM, Adrian Stoness <tdk.knight at gmail.com> wrote:
yes the green cubes
On Wed, Jun 20, 2012 at 1:20 PM, Paul Anderson <useddec at gmail.com> wrote:
> On Wed, Jun 20, 2012 at 3:03 AM, Adrian Stoness <tdk.knight at gmail.com>
> wrote:
> > and how uncomon are the Qbus ones?
> >
>
> I would believe that the RKV11 is the rarest of the three.
>
>
>
> > i've got the omibus pdp8a with the rk8e but its kinda useles with out the
> > card jumpers and cables
>
>
> The green cubes that connect the tops of the cards together?
> The cable that goes from the RK8E to the first drive? If you have a
> unibus cable (BC11A)
> That is damaged on one end, or even a good one, you should be able to
> cut off one end and adapt it to the controller.
>
> Paul
>
2:55 p.m.
i was hopeing u guys new what cable i needed
On Wed, Jun 20, 2012 at 1:49 PM, Paul Anderson <useddec at gmail.com> wrote:
If you can find a Emulex or Dilog part number for the
controller, I'll
see what I have.
I should have a few of the over the top connectors somewhere, but what
cable do you need?
Paul
On Wed, Jun 20, 2012 at 1:31 PM, Adrian Stoness <tdk.knight at gmail.com>
wrote:
yes the green cubes
On Wed, Jun 20, 2012 at 1:20 PM, Paul Anderson <useddec at gmail.com>
wrote:
> On Wed, Jun 20, 2012 at 3:03 AM, Adrian Stoness <tdk.knight at gmail.com>
> wrote:
> > and how uncomon are the Qbus ones?
> >
>
> I would believe that the RKV11 is the rarest of the three.
>
>
>
> > i've got the omibus pdp8a with the rk8e but its kinda useles with out
the
> > card jumpers and cables
>
>
> The green cubes that connect the tops of the cards together?
> The cable that goes from the RK8E to the first drive? If you have a
> unibus cable (BC11A)
> That is damaged on one end, or even a good one, you should be able to
> cut off one end and adapt it to the controller.
>
> Paul
>
2:57 p.m.
m7104
m7105
m7106
On Wed, Jun 20, 2012 at 1:55 PM, Adrian Stoness <tdk.knight at gmail.com>wrote:
i was hopeing u guys new what cable i needed
On Wed, Jun 20, 2012 at 1:49 PM, Paul Anderson <useddec at gmail.com> wrote:
If you can find a Emulex or Dilog part number for
the controller, I'll
see what I have.
I should have a few of the over the top connectors somewhere, but what
cable do you need?
Paul
On Wed, Jun 20, 2012 at 1:31 PM, Adrian Stoness <tdk.knight at gmail.com>
wrote:
yes the green cubes
On Wed, Jun 20, 2012 at 1:20 PM, Paul Anderson <useddec at gmail.com>
wrote:
> On Wed, Jun 20, 2012 at 3:03 AM, Adrian Stoness <tdk.knight at gmail.com>
> wrote:
> > and how uncomon are the Qbus ones?
> >
>
> I would believe that the RKV11 is the rarest of the three.
>
>
>
> > i've got the omibus pdp8a with the rk8e but its kinda useles with
out
the
> > card jumpers and cables
>
>
> The green cubes that connect the tops of the cards together?
> The cable that goes from the RK8E to the first drive? If you have a
> unibus cable (BC11A)
> That is damaged on one end, or even a good one, you should be able to
> cut off one end and adapt it to the controller.
>
> Paul
>
21 Jun
21 Jun
7:33 a.m.
On Wed, Jun 20, 2012 at 01:57:04PM -0500, Adrian Stoness wrote:
m7104
m7105
m7106
On Wed, Jun 20, 2012 at 1:55 PM, Adrian Stoness <tdk.knight at gmail.com>wrote:
> i was hopeing u guys new what cable i needed
>
>
I assume you are talking about the M993C between the controller and the
first drive.
http://www.pdp8online.com/rk05/pics/m993c.shtml?small
I've seen them with and without the IC installed. I don't know if/when its
needed. The one I'm running with doesn't have it.
4419
days inactive
4420
days old
8 comments
3 participants
participants (3)
-
djg＠pdp8online.com -
tdk.knight＠gmail.com -
useddec＠gmail.com