Al: I had this issue on a Cubix 486-based SBC that I'm using for a firewall. I wound-up ordering the breakout cable from Cubix for $35. It is a small PCB on an ISA bracket and it has a video connector, mouse, and keyboard connector. It appears that there are coils or something on the board, probably for noise rejection and the like. Cubix was fairly helpful, giving me the part number to use when I called the parts line to order it. Rich -----Original Message----- From: Corda Albert J DLVA [mailto:CordaAJ@nswc.navy.mil] Sent: Tuesday, July 11, 2000 6:12 PM To: 'classiccmp(a)classiccmp.org' Subject: Cubix System... Anyone know the pinout of the Video/Keyboard/Mous e Connector? Hi Guys! I just came across a Cubix ERS FTII System... I realize that this may not fit under the "10-year" rule, but it is a rather unique system, and I'd like to try to get it going (possibly with NetBSD or Linux). The Cubix site has most if the Info I need, but apparently this system used a single DB25 connector/cable to route the video, keyboard and mouse signals to a small breakout box (which I don't have, and the Cubix site doesn't document) Does anyone happen to know what the pinout of that connector is? Also, if anyone has any experience with setting linux up on this critter, I'd love to know about it. The current configuration of the box is: 3 BC5055 60 Mhz Pentium processors 1 BC3035 (486?) -Thanks in advance... -al- -acorda(a)geocities.com