23 Sep
2004
23 Sep
'04
5:54 p.m.
On Sep 23 2004, 21:50, Jules Richardson wrote:
I was just thinking that it would be an interesting
challenge to
build a
fully mechanical version - no electrical parts
whatsoever.
Steam-powered
pong, that'd be different... "Babbage
Pong", maybe... :-)
OK, but you have to use proper graphited yarn instead of PTFE and
O-rings. Or use compressed air - you can buy the gates off the shelf
if you're rich enough.
And given the light loading involved, why not use
wooden gearing
instead
of metal: "Organic Pong"...
Ow! If you'd ever tried to build wooden gears that don't self-strip...
Of course, you could go the whole hog and use disks with pegs in them,
and a water wheel to power it, but you'd be in for a surprise when you
find out how much energy it takes to turn such constructions :-)
--
Pete Peter Turnbull
Network Manager
University of York
23 Sep
23 Sep
6:45 p.m.
OK, but you have to use proper graphited yarn instead
of PTFE
and O-rings. Or use compressed air - you can buy the gates
off the shelf if you're rich enough.
Why don't we just use one of the origins of computing engines as we know
today - the woollen weaving engine. We just need to come up with a way of
getting the shuttle to move between weaving stations :)
w
9:36 p.m.
And thusly Adrian Graham spake:
Oh my. That hurt.
Cheers to the weaving words wrote,
Bryan Pope
OK, but you have to use proper graphited yarn
instead of PTFE
and O-rings. Or use compressed air - you can buy the gates
off the shelf if you're rich enough.
Why don't we just use one of the origins of computing engines as we know
today - the woollen weaving engine. We just need to come up with a way of
getting the shuttle to move between weaving stations :)
24 Sep
24 Sep
5:42 a.m.
On Fri, 2004-09-24 at 00:45 +0100, Adrian Graham wrote:
I like it - Pong on a huge scale. "Godzilla Pong" :-)
J.
OK, but you
have to use proper graphited yarn instead of PTFE
and O-rings. Or use compressed air - you can buy the gates
off the shelf if you're rich enough.
Why don't we just use one of the origins of computing engines as we know
today - the woollen weaving engine. We just need to come up with a way of
getting the shuttle to move between weaving stations :)
5:57 a.m.
On Thu, 2004-09-23 at 23:54 +0100, Pete Turnbull wrote:
Well the loading's not great; much less than in a wooden-geared clock,
say. Not much acual gearing needed either; it's mainly just levers.
The complex bit is getting forward / reverse / off for the drive to the
ball X and Y axis (off needed at start of game and when the ball's
travelling in a straight line of course). A differential's probably the
best bet there on each axis - lock the gear carrier to input and output
shafts via a pair of clutches and you get forward, lock the gear carrier
to the chassis and you get reverse, disengage everything and you get the
'off' state (providing the friction on the output shaft is high enough
to overcome the friction in the diff)
The simulated ball just travels on wheeled trucks set on a guide in each
axis, so I wouldn't imagine friction would be that high at all.
Whether bevel gears could be made out of wood is another matter!
Oh, the insanity :-)
cheers,
Jules
On Sep 23 2004, 21:50, Jules Richardson wrote:
:-P
All that brass might be slightly on the expensive side, too...
pong, that'd be different... "Babbage
Pong", maybe... :-)
OK, but you have to use proper graphited yarn instead of PTFE and
O-rings. Or use compressed air - you can buy the gates off the shelf
if you're rich enough. And given the
light loading involved, why not use wooden gearing
instead of metal: "Organic Pong"...
Ow! If you'd ever tried to build wooden gears that don't self-strip...
7469
days inactive
7470
days old
4 comments
4 participants
participants (4)
-
bpope＠wordstock.com -
julesrichardsonuk＠yahoo.co.uk -
pete＠dunnington.u-net.com -
witchy＠binarydinosaurs.co.uk