-----Oorspronkelijk bericht----- From: Noel Chiappa Sent: Tuesday, October 13, 2015 3:29 PM To: cctalk at classiccmp.org Cc: jnc at mercury.lcs.mit.edu Subject: Re: H960 logo panel OK, I scanned it (I prefer scanning to pictures, as there is almost inevitably distortion when using a lens), at 300 dpi. The whole thing wouldn't fit in my A3 scanner, but I got the majority of it, and the part that's not shown is just the plain two-colour band. Available here: http://ana-3.lcs.mit.edu/~jnc/tech/jpg/CanadaPanel.jpg and I've also added it to my 'PDP-11 resources page', here: http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/PDP-11_Stuff.html Also, I have recently scanned in the front indictor panel for the 11/55 and 11/70 (the later one, with the blue/blue colour scheme), and those can be found on that page too, along with drawings of the basic 40-45-70 panel (only the on/off switch, etc, locations differ) and the basic 45-50-55 panel (with on/off switch and selector switch holes added); those have also been added to that page. I'd like to encourage people with other front panels (I myself am particularly interested in those for the 11/45, RF11, RK11-C and RP11-C) to scan them too, for people who are interested in doing reproductions. I can host the images, for people who don't have that capability. Noel ========= Nice scan Noell. I will probably download everything ... in my experience, websites with "/~xxxx/" in it seem to disappear after "some" time :-/ I have probably all PDP-11 models (except the PDP-11/50), but I don't think a scanner can carry the weight of a fully filled H960 :-) And no, I am not going to disassemble just for a scan. I could take pictures, but as you say, edges will warp a little. - Henk, PA8PDP