Thank you all for the generous offers of assistance, information and
hardware.
I've already got another pair of drives coming from another list member,
but I really appreciate your offer.
The kindness and generosity of the folks on this list is really amazing.
Erik S. Klein
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org] On Behalf Of Rich Beaudry
Sent: Friday, March 29, 2002 11:16 AM
To: classiccmp(a)classiccmp.org
Subject: Osborne Floppy Drives
>Before you scrap them?
>
>I'm looking for some old 5.25" drives to bring back a couple of
Osborne
1s
to dual drive
status.
Be advised that the Osborne drives are not directly interchangeable
with
`normal' 5.25" drives. The ribbon cable to
the card edge carries drive
power as well as signals and is wired differently. You will need to
conjure an adapter to use normal ones.
I have an Osborne 1 that has had dead video for a while. Since it is a
spare anyway, I would be willing to disassemble the drives, and send
them to
the original poster (Erik, I think?). I'd also try to save any cables,
connectors, screws, etc.
One caveat... this O1 has had dead video since I got it, so I have never
fully tested out the floppies... I suppose at some point I could have
swapped them into a working O1, but I never had the time....
If the original poster could email me off-list, we can exchange shipping
information. I will not charge for the drives, but because they're not
light, I'd appreciate reimbursement for shipping....
Thanks!
Rich B.
_________________________________________________________________
Chat with friends online, try MSN Messenger:
http://messenger.msn.com