26 Jul
2003
26 Jul
'03
12:28 p.m.
I have a Pet 2001 N16. When powered up, it displays a screen full
of garbled characters. I read a message board post on http://www.
classiccmp.org/pipermail/cctalk/2003-January/014761.html that recommended
that I replace the 2114s (from bgmicro.com) to swap out the video
RAM. Any opinions/suggestions? Has anyone had a similar experience?
???? D???@??
29 Jul
29 Jul
2:32 p.m.
I have a PET 2001, that displayed the same garbled screen after
many years of storage..
What I did was remove the RAM chips from their sockets
and reinserted them.
I don't know if all 2001 models had plug in RAM chips, mine did however.
Anyway to my surprise the PET booted and no more garbage or errors..
Worth a try..
Phil
----- Original Message -----
From: <Degnan(a)degnanco.net>et>; "Co." <billdeg(a)degnanco.com>
To: <cctech(a)classiccmp.org>
Sent: Thursday, July 24, 2003 4:29 PM
Subject: Pet 2001 N16 Display Problem
I have a Pet 2001 N16. When powered up, it displays a
screen full
of garbled characters. I read a message board post on http://www.
classiccmp.org/pipermail/cctalk/2003-January/014761.html that recommended
that I replace the 2114s (from bgmicro.com) to swap out the video
RAM. Any opinions/suggestions? Has anyone had a similar experience?
???? D???@??
7822
days inactive
7825
days old
1 comments
2 participants
participants (2)
-
Degnan＠degnanco.net -
musicman38＠comcast.net