9 Dec
1999
9 Dec
'99
11:21 p.m.
Don, Joe,
I might be able to help both of you!
I believe that I have a manual for the HP-IL RS323 device somewhere, probably
also the device itself. I'll check and revert.
I also have an old HP 110+, the HP-IL printer that goes (went) with it, a HP-IL
floppy drive (720kb), and a HP-IL GPIO device (General Purpose I/O).
I'm willing to trade the HP-IL RS232 device for (almost) anything for the
HP110+, S/W, firmware, or the memory expansion board. Suggestions, please!
Thomas
10 Dec
10 Dec
5:12 a.m.
Thomas,
You're in luck. I have tons of software for the 110. What are you
looking for? I'm more interested in the GPIO interface though.
Your disk drive is a 9114. The printer is a HP 2225 ThinkJet. I'm VERY
familar with both of them. I've got AT LEAST a dozen of the drives and AT
LEAST two dozen of the printers!
Joe
At 02:21 PM 12/10/99 +0100, you wrote:
Don, Joe,
I might be able to help both of you!
I believe that I have a manual for the HP-IL RS323 device somewhere,
probably
also the device itself. I'll check and revert.
I also have an old HP 110+, the HP-IL printer that goes (went) with it, a
HP-IL
floppy drive (720kb), and a HP-IL GPIO device (General
Purpose I/O).
I'm willing to trade the HP-IL RS232 device for (almost) anything for the
HP110+, S/W, firmware, or the memory expansion board. Suggestions, please!
Thomas
8:40 a.m.
On Fri, 10 Dec 1999, Joe wrote:
Thomas,
You're in luck. I have tons of software for the 110. What are you
looking for? I'm more interested in the GPIO interface though.
What are the requirements/capabilities of the GPIO Interface?
- don
Your disk drive is a 9114. The printer is a HP 2225
ThinkJet. I'm VERY
familar with both of them. I've got AT LEAST a dozen of the drives and AT
LEAST two dozen of the printers!
Joe
11:10 a.m.
At 02:40 PM 12/10/99 -0800, Don asked:
On Fri, 10 Dec 1999, Joe wrote:
It does 16 bit parallel I/O. Or you can divide it into 2 8-bit ports.
Each port can be defined as Input only, Output only or both In and Out.
But remember, I asked for it first! :-)
Joe
Thomas,
You're in luck. I have tons of software for the 110. What are you
looking for? I'm more interested in the GPIO interface though.
What are the requirements/capabilities of the GPIO Interface?
8:42 a.m.
On Fri, 10 Dec 1999 thomas.h.lindberg(a)se.abb.com wrote:
Don, Joe,
I might be able to help both of you!
I believe that I have a manual for the HP-IL RS323 device somewhere, probably
also the device itself. I'll check and revert.
I also have an old HP 110+, the HP-IL printer that goes (went) with it, a HP-IL
floppy drive (720kb), and a HP-IL GPIO device (General Purpose I/O).
I'm willing to trade the HP-IL RS232 device for (almost) anything for the
HP110+, S/W, firmware, or the memory expansion board. Suggestions, please!
Thomas
Thomas, for your HP 110+ I have the following software:
HEWLETT-PACKARD
Name Format Description
100-SYS DSDD HP 100 series (120/125) CP/M 2.2 system disk
100-UTIL DSDD HP 100 series utilities
100-TUT DSDD HP 100 series Computer Tutor
100-WS DSDD HP 100 series Wordstar 3.0
100-WORD DSDD HP 100 series The Word+
100-COND DSDD HP 100 series Condor 20 dbms
100-VISI DSDD HP 100 series Visicalc
100-GRPH DSDD HP 100 series Graphics
100-DLNK DSDD HP 100 series to host comm programs
- don
11:15 a.m.
At 02:42 PM 12/10/99 -0800, Don scribbled:
Carefull there! The 110 won't run CPM. (believe it or not Don!) You
need to check those others and see if they're for the 120/125, 150 or 110.
They're all 100 series machines but they're all different. SOME of the 150
stuff may run on the 110 but only if it's not tailored for the 150. The
150 is MS-DOS but it's very different from the IBM PC and most (all?) of
the HP software that I have for it has been tailored to run on the 150 and
can't be used on the 110.
Joe
On Fri, 10 Dec 1999 thomas.h.lindberg(a)se.abb.com wrote:
>
>
> Don, Joe,
>
> I might be able to help both of you!
>
> I believe that I have a manual for the HP-IL RS323 device somewhere,
probably
> also the device itself. I'll check and
revert.
>
> I also have an old HP 110+, the HP-IL printer that goes (went) with it,
a
HP-IL
floppy drive
(720kb), and a HP-IL GPIO device (General Purpose I/O).
I'm willing to trade the HP-IL RS232 device for (almost) anything for the
HP110+, S/W, firmware, or the memory expansion board. Suggestions, please!
Thomas
Thomas, for your HP 110+ I have the following software:
HEWLETT-PACKARD
Name Format Description
100-SYS DSDD HP 100 series (120/125) CP/M 2.2 system disk
100-UTIL DSDD HP 100 series utilities
100-TUT DSDD HP 100 series Computer Tutor
100-WS DSDD HP 100 series Wordstar 3.0
100-WORD DSDD HP 100 series The Word+
100-COND DSDD HP 100 series Condor 20 dbms
100-VISI DSDD HP 100 series Visicalc
100-GRPH DSDD HP 100 series Graphics
100-DLNK DSDD HP 100 series to host comm programs
10:42 a.m.
On Fri, 10 Dec 1999, Joe wrote:
At 02:42 PM 12/10/99 -0800, Don scribbled:
>
>
>On Fri, 10 Dec 1999 thomas.h.lindberg(a)se.abb.com wrote:
>
________O/_______
O\
>> I'm willing to trade the HP-IL RS232
device for (almost) anything for the
>> HP110+, S/W, firmware, or the memory expansion board. Suggestions, please!
>>
>> Thomas
>>
>
>Thomas, for your HP 110+ I have the following software:
>
> HEWLETT-PACKARD
>
>Name Format Description
>100-SYS DSDD HP 100 series (120/125) CP/M 2.2 system disk
>100-UTIL DSDD HP 100 series utilities
________O/_______
O\
Carefull there! The 110 won't run CPM. (believe
it or not Don!) You
need to check those others and see if they're for the 120/125, 150 or 110.
They're all 100 series machines but they're all different. SOME of the 150
stuff may run on the 110 but only if it's not tailored for the 150. The
150 is MS-DOS but it's very different from the IBM PC and most (all?) of
the HP software that I have for it has been tailored to run on the 150 and
can't be used on the 110.
Sloppy nomenclature on my part. I know that the 150 won't run it
(without MYZ80 or such) but I made an (unwarranted) assumption about
the 110. Thanks for the correction.
- don
12:50 p.m.
At 04:42 PM 12/10/99 -0800, you wrote:
It's easy to confuse them since HP calls them all "Series 100".
Joe
On Fri, 10 Dec 1999, Joe wrote:
the
At 02:42 PM 12/10/99 -0800, Don scribbled:
>
>
>On Fri, 10 Dec 1999 thomas.h.lindberg(a)se.abb.com wrote:
>
________O/_______
O\
> >> I'm willing to trade the HP-IL RS232 device for (almost) anything for
> >> HP110+, S/W, firmware, or the memory
expansion board. Suggestions,
please!
>>
>> Thomas
>>
>
>Thomas, for your HP 110+ I have the following software:
>
> HEWLETT-PACKARD
>
>Name Format Description
>100-SYS DSDD HP 100 series (120/125) CP/M 2.2 system disk
>100-UTIL DSDD HP 100 series utilities
________O/_______
O\
Carefull there! The 110 won't run CPM.
(believe it or not Don!) You
need to check those others and see if they're for the 120/125, 150 or 110.
They're all 100 series machines but they're all different. SOME of the 150
stuff may run on the 110 but only if it's not tailored for the 150. The
150 is MS-DOS but it's very different from the IBM PC and most (all?) of
the HP software that I have for it has been tailored to run on the 150 and
can't be used on the 110.
Sloppy nomenclature on my part. I know that the 150 won't run it
(without MYZ80 or such) but I made an (unwarranted) assumption about
the 110. Thanks for the correction.
- don
9143
days inactive
9143
days old
7 comments
3 participants
participants (3)
-
donm＠cts.com -
rigdonj＠intellistar.net -
thomas.h.lindberg＠se.abb.com