8 Oct
2018
8 Oct
'18
9:23 a.m.
From: systems_glitch
Looking for a pair of rack rails for my PDP-11/10.
Is it in a BA11-K (as suggested by the Subject line), or BA11-D? (-11/10's
came in both, for the 10-1/2" box.) The -K has the power supply on the end,
the -D down one side.
What slide hardware, if any, do you already have? (Many come with the inners
[the part that bolts to the mounting box] still there, but the outers have
been discarded.) If you've got the inners, you're home free; I can give you a
General Devices 'Chassis Trak' part number that will provide working outers
(although you'd probably have to modify the locking hole for the lock to
work).
If you don't have the inners, I'll have to go look and see what can be
done... (The original DEC inners are, AFAIK, now unobtainium.) Oh, and if you
do have inners, I assume they are the earlier, grey-coated ones, not the
later silver ones?
Noel
8 Oct
8 Oct
9:39 a.m.
Looking for a pair of rack rails for my
PDP-11/10.
Is it in a BA11-K (as suggested by the Subject line), or BA11-D? (-11/10's
came in both, for the 10-1/2" box.) The -K has the power supply on the end,
the -D down one side.
<snip> If you've got the inners, you're home free; I
can give you a
General Devices 'Chassis Trak' part number that will provide working outers
(although you'd probably have to modify the locking hole for the lock to
work).
What is the part number for the -D ?
Bill
9:47 a.m.
It's the BA11-K with the H765 power supply on the back end. I do have the
inner rails/latch system for tilting the box, they are plain aluminum. The
outer rails probably went with the rack.
Thanks,
Jonathan
On Mon, Oct 8, 2018 at 12:40 PM Bill Degnan via cctalk <
cctalk at classiccmp.org> wrote:
(-11/10's
Looking for a pair of rack rails for my
PDP-11/10.
Is it in a BA11-K (as suggested by the Subject line), or BA11-D? came in both, for the 10-1/2" box.) The -K
has the power supply on the
end,
the -D down one side.
<snip>
If you've got the inners, you're home
free; I can give you a
General Devices 'Chassis Trak' part number that will provide working
outers
(although you'd probably have to modify the
locking hole for the lock to
work).
What is the part number for the -D ?
Bill
12:25 p.m.
On 10/8/18 9:47 AM, systems_glitch via cctalk wrote:
It's the BA11-K with the H765 power supply on the
back end. I do have the
inner rails/latch system for tilting the box, they are plain aluminum.
They're molybdenum-coated steel. Aluminum would never hold up in that application.
12:56 p.m.
While we are on the subject, I do need the part number of the -D version
outer rails, the 11/05 11/10 chassis with power supply on the side. I have
the inner rails with the tilt feature.
2:01 p.m.
I don't remember the D tilting.
On Mon, Oct 8, 2018 at 2:57 PM Bill Degnan via cctalk <cctalk at classiccmp.org>
wrote:
While we are on the subject, I do need the part number
of the -D version
outer rails, the 11/05 11/10 chassis with power supply on the side. I have
the inner rails with the tilt feature.
10:30 a.m.
The D has a H750 PS on the right side.
Paul
On Mon, Oct 8, 2018 at 11:40 AM Bill Degnan via cctalk <
cctalk at classiccmp.org> wrote:
(-11/10's
Looking for a pair of rack rails for my
PDP-11/10.
Is it in a BA11-K (as suggested by the Subject line), or BA11-D? came in both, for the 10-1/2" box.) The -K
has the power supply on the
end,
the -D down one side.
<snip>
If you've got the inners, you're home
free; I can give you a
General Devices 'Chassis Trak' part number that will provide working
outers
(although you'd probably have to modify the
locking hole for the lock to
work).
What is the part number for the -D ?
Bill
2268
days inactive
2268
days old
6 comments
5 participants
participants (5)
-
aek＠bitsavers.org -
billdegnan＠gmail.com -
jnc＠mercury.lcs.mit.edu -
systems.glitch＠gmail.com -
useddec＠gmail.com