22 Aug
2002
22 Aug
'02
4:10 p.m.
Hello,
I just picked up an Amiga Video Toaster (just the CPU unit). Inside on
the
left are the video toaster cards, but the two right-most slots have
full length
cards made by Digital Processing Systems Inc. The cards are daisy
chained to a connector on the motherboard. Each card has four BNC
connectors, a 5-pin DIN, an RJ-11 jack and a three-position switch on
the
rear slot panel. The back side of each card is covered with a
full-length
aluminum shield. The only identifying numbers I've found, besides the
FCC ID, is "743-770", then "PT2 REV-3, Made in Canada".
There is also a Supra memory card with 6 MB (three of four rows
populated) and an A2091 hard card.
I haven't tried to boot this yet since I need to locate an Amiga
keyboard,
but I'd be interested to know if anyone has any documentation on the
Digital Processing Systems cards. Thanks!
Cheers,
Dan
22 Aug
22 Aug
4:30 p.m.
I just picked up an Amiga Video Toaster (just the CPU
unit). Inside on the
left are the video toaster cards, but the two right-most slots have
full length
cards made by Digital Processing Systems Inc. The cards are daisy
chained to a connector on the motherboard. Each card has four BNC
connectors, a 5-pin DIN, an RJ-11 jack and a three-position switch on the
rear slot panel. The back side of each card is covered with a full-length
aluminum shield. The only identifying numbers I've found, besides the
FCC ID, is "743-770", then "PT2 REV-3, Made in Canada".
Good score. The boards sound like the TBC IV or TBC IV Plus.
The BNC's should be:
video in, video out, timing in, timing out.
The RJ-11 should be the serial connection and the 5-pin DIN
should be the S-video in. You could supposedly have up to four of
these boards daisychained together.
Of course, I could be wrong <g> That's what it sounds like though.
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
6:40 p.m.
Dan Veeneman wrote:
Hello,
I just picked up an Amiga Video Toaster (just the CPU unit). Inside on
the
left are the video toaster cards, but the two right-most slots have
full length
cards made by Digital Processing Systems Inc. The cards are daisy
chained to a connector on the motherboard. Each card has four BNC
connectors, a 5-pin DIN, an RJ-11 jack and a three-position switch on
the
rear slot panel. The back side of each card is covered with a
full-length
aluminum shield. The only identifying numbers I've found, besides the
FCC ID, is "743-770", then "PT2 REV-3, Made in Canada".
There is also a Supra memory card with 6 MB (three of four rows
populated) and an A2091 hard card.
I haven't tried to boot this yet since I need to locate an Amiga
keyboard,
but I'd be interested to know if anyone has any documentation on the
Digital Processing Systems cards. Thanks!
Cheers,
Dan
Those two cards are time base correctors for video tape machines to play
into the Toaster.
BTW you can boot the CPU w/o a keyboard, you just can't do much without
it. An RGB monitor that syncs to 15 kHz would be nice, but for now if
you have a composite video monitor, just plug it into the RCA jack on
the back labeled VIDEO out, should have a yellow insulator. Keep your
eyes peeled for which WB version you have. If it has a basic looking
background and crude disk icons that is 1.3; if it is a grey background
and nicer looiking icons, it is probably Kickstart 2.04 or 3.x, which is
not altogether that common.
I have a bunch of toasters, 2091 SCSI controller cards, etc. and sorry
to say they aren't worth much on the used market since there are no NEW
Amigas being built to put them in. The keyboard alone is about $60, but
you can use a PC keyboard with an adapter which runs about $50. Check
with www.softhut.com for the adapters.
Hope you don't have much money in it. Since it is incomplete, the cost
of making it whole will probably exceed the value of the Amiga/Toaster
together.
Gary Hildebrand
St. Joseph, MO
6:57 p.m.
Those two cards are time base correctors for video tape
machines to play
into the Toaster.
My A3000's an ex-Toaster machine...you can tell by the hacked
rear panel at the video slot. It no longer has the Toaster installed
though. It does have a GVP TBCplus installed...kind of cool in that
instead of the multiple BNC/RCA/DIN connectors crammed onto the end
of the expansion card it has a single DB-25 connector that a
10-headed cable plugs up to. Makes it a lot easier to switch
connectors as well. I don't think it was quite as good a card as the
DPS units but it supposedly could be used to convert signals between
NTSC and PAL on the fly as well as crude video capture.
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
8236
days inactive
8236
days old
3 comments
3 participants
participants (3)
-
dan＠ekoan.com -
ghldbrd＠ccp.com -
jhellige＠earthlink.net