31 Oct
2003
31 Oct
'03
3:42 a.m.
On Oct 31, 8:05, Pat wrote:
still
On Friday 31 October 2003 03:25, Pete Turnbull wrote:
Is there a
working terminator on the second connector on the drive?
There *should* be... this is the second terminator I've tried and it doesn't work, but I am not sure if the terminator
works. Of course,
I'm more
likely to suspect the drive than the terminator
I'm using...
Looks like it. If you've tried two terminators and two controllers,
all that's left is the cable or the drive. I assume you've got the
ribbon cable from the controller to the bulkhead connector round the
right way.
--
Pete Peter Turnbull
Network Manager
University of York
31 Oct
31 Oct
5:23 a.m.
On Friday 31 October 2003 12:42, Pete Turnbull wrote:
On Oct 31, 8:05, Pat wrote:
Hmm, right that's one thing I'm not too sure about... the cable is just
straight-thru, right? I'm using a makeshift cable (one of a couple that I've
tried), and it's straight-thru, because I was assuming the 'real' cable is as
well. Sometime today I'll try to look to see if there's anything too obvious
that's wrong (eg missing 4MHz clock signal).
Pat
--
Purdue University ITAP/RCS
Information Technology at Purdue
Research Computing and Storage
http://www.itap.purdue.edu/rcs/
On Friday 31 October 2003 03:25, Pete Turnbull
wrote:
still
Is there a working terminator on the second
connector on the drive?
There *should* be... this is the second terminator I've tried and it doesn't work, but I am not sure if the
terminator works. Of course,
I'm more
likely to suspect the drive than the terminator
I'm using...
Looks like it. If you've tried two terminators and two controllers,
all that's left is the cable or the drive. I assume you've got the
ribbon cable from the controller to the bulkhead connector round the
right way.
7723
days inactive
7723
days old
1 comments
2 participants
participants (2)
-
pat＠purdueriots.com -
pete＠dunnington.u-net.com