21 Apr
2011
21 Apr
'11
9:48 a.m.
What are the dimensions and weights of a PDP-11/60 in the late model
cabinet - the one that was used on the DECsystem branded PDP-11/70s?
Google image search for "DECsystem 570".
No drives installed.
--
Will
21 Apr
21 Apr
9:57 a.m.
William Donzelli wrote:
What are the dimensions and weights of a PDP-11/60 in
the late model
cabinet - the one that was used on the DECsystem branded PDP-11/70s?
Google image search for "DECsystem 570".
No drives installed.
You're welcome to come measure mine. Weight might be more difficult though.
Peace... Sridhar
12:36 p.m.
On Thu, 21 Apr 2011, Sridhar Ayengar wrote:
William Donzelli wrote:
Would that info be in the 11/60 handbook? If so I know where there is a
copy, and I can look at it later.
Zane
What are the dimensions and weights of a
PDP-11/60 in the late model
cabinet - the one that was used on the DECsystem branded PDP-11/70s?
Google image search for "DECsystem 570".
No drives installed.
You're welcome to come measure mine. Weight might be more difficult though.
Peace... Sridhar 
2:09 p.m.
The site prep and installation manuals should have it.
Paul
On Thu, Apr 21, 2011 at 2:36 PM, Zane H. Healy <healyzh at aracnet.com> wrote:
On Thu, 21 Apr 2011, Sridhar Ayengar wrote:
William Donzelli wrote:
Would that info be in the 11/60 handbook? ?If so I know where there is a
copy, and I can look at it later.
Zane
What are the dimensions and weights of a PDP-11/60 in the late model
cabinet - the one that was used on the DECsystem branded PDP-11/70s?
Google image search for "DECsystem 570".
No drives installed.
You're welcome to come measure mine. ?Weight might be more difficult
though.
Peace... ?Sridhar 
27 Apr
27 Apr
11:47 a.m.
Will -
I could give you a somewhat educated guess -- I had a development 11/60 in
1978. As a single cabinet (dual RL02 drives, no tape drive), it ran about
60 inches high x 60 inches wide x 30 inches deep (deeper if you outrigger
the feet at the front). Not sure at all on the weight, but I'm thinking
500-600 lbs?
-- Tony
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of William Donzelli
Sent: Thursday, April 21, 2011 12:49 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: DEC PDP-11 weight
What are the dimensions and weights of a PDP-11/60 in the late model cabinet
- the one that was used on the DECsystem branded PDP-11/70s?
Google image search for "DECsystem 570".
No drives installed.
--
Will
4988
days inactive
4994
days old
5 comments
5 participants
participants (5)
-
healyzh＠aracnet.com -
ploopster＠gmail.com -
tony.eros＠machm.org -
useddec＠gmail.com -
wdonzelli＠gmail.com