RAM (was Re: DECServer again - test-drb@ccmp.vtda.org

8 Aug 2001

...
  It may not be
upgradeable.  To open one up, depress the two latches on the
bottom of the unit near the front edge and pop open the top.  It isn't easy
unless you have three or four hands.  If there are SIMM slots the memory
can be upgraded.  
 Ok, it does have two SIMM slots. They look like standard SIMMs could be 
 interesting. Are there specific requirements? The existing SIMM stick 
 appears to be 256K x 36 (ie a simple 1MB true parity SIMM @ either 80 or 130ns) 
I don't know the specified RAM, but I was able to upgrade one with
a 1Mx36 SIMM I had sitting around.  You'll need at least 4MB to use
the WWENG2 image.  Also, while the box is open take a look and see if
it has the PCMCIA slot.
-- 
Eric Dittman
dittman(a)dittman.net