On Fri, 21 Jan 2005 09:46:28 -0800, Robert Armstrong <bob(a)jfcl.com> wrote: Ow! Sorry I can't help you... I have an 8200/8300 (slower CPU cards). It was purchased as an 8200 for $13000 (used) by a former employer. I got to take it home eventually, picked up a cheap (for the early 1990s) KA-820 ($50? $100?), squared up the microcode, and made it into an 8300. I have an RA81 and a 3rd-party ESDI/SDI box on it. I'm trying to get an ethernet card of some variety (DEBNA? DEBNT? Can't remember which one I have) working in it. Got a KDB50 in it, a COMBOARD-BI (68010-based dual-serial protocol engine for which I wrote the firmware and VMS driver myself), and a *wad* of smallish memory cards. While I wouldn't mine a pair of KA-825s, either, I'm also on the lookout for any largish memory cards... I have a number of 2MB modules, and my bus is full. I'm also trying to debug a couple of DWBUAs. I have docs, cables, etc. I _might_ be having problems with the UET board (Unibus Exerciser/Terminator)... but in any case, the DWBUA module doesn't pass self-test. All I can offer, Bob, is to answer questions about it, should you have any... I don't have spares, except for a stack of COMBOARDs... unless you for some reason wanted to talk HASP or 3780 from your VAX (and under nothing newer than VMS 5.5 unless I were to update the driver), it wouldn't do much good. _I_ have such a need (simple networking with other boxes at my place), but most people do not. -ethan