--- On Tue 11/15, Wolfe, Julian < ISC277 at CLCILLINOIS.EDU > wrote: From: Wolfe, Julian [mailto: ISC277 at CLCILLINOIS.EDU] To: info-pdp11 at village.org, cctalk at classiccmp.org Date: Tue, 15 Nov 2005 17:28:40 -0600 Subject: Panel question I'm trying to mount the front panel on my 11/34, but I've run into aproblem: I have no mounting brackets. What do the brackets look like formmounting to a BA11-K, and does anyone here have any extras?Secondly, was there a H964x style beige panel with black vents that would goon the non-covered portion of the 11/34a's BA11-K? I seem to rememberseeing that sort of thing on some 11/44s and 11/24s.Again, any advice would be appreciated. ------------ I thought I had an extra, and was going to look at it. Seems like I must have sent it off to someone. It's not like the older clip on panel types. It is screwed to a bracket. If no one else comes forward I'll remove the one from my 11/34 and look. As to the other panel, mine is simply a 1/2 DEC black panel screwed in from the front above the programmer panel. Tim R _______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web!