Wakeup call! Haven't had any wanting the whole system or the monitor. It's parts time! Does anyone need any spares for their AT&T 6300? First the pictures, then the story: http://www.wpic.com/whdawson/classiccmp/ATT6300front.jpg http://www.wpic.com/whdawson/classiccmp/ATT6300rear.jpg I stopped in the local Hidden Treasures (actual name) store a couple of weeks ago and noticed this on the shelf, minus keyboard. I've been a regular visitor there for the last several years, and when I pointed out to Terry, the new manager, that this system was kinda useless without the AT&T keyboard, he told me to just take it, as in free, because it was probably going to end up in the dumpster anyway since no one seemed interested in it and this would save him the effort. The power supply fan runs, and little else. No cursor, no boot, no drive activity other than it initializing, no nothing, although the AT&T monitor appears OK since when I turn off the system I get green all over and retrace lines as the power collapses. Same if I unplug the monitor when the system is powered up. The monitor is powered from the 6300 and has a jumper from the PS to the video board, standard 6300. Here's the parts available: AT&T monitor, no screen burn, nice, cord storage in swivel base. AT&T 6300, made in Italy: PC1050 motherboard, markings of 0091-0-5-00 REV P4, AT&T 227692 T 10 CPU3 9/84, BIOS REV 1.21, FCC DVR7NICPU3; 8086-2 CPU, memory chips are MOSTEK MK4564-N-15; OLIVETTI Video PCB, full length, markings of CRT 313M; OLIVETTI Bus converter; 5.25" floppy drive; power supply; etc. This system is in very good to excellent condition. The computer is dusty inside, but even the felt feet are still on it. The CRT case is not yellowed. The story I got was that an elderly lady had donated it to the store. Cost is only 1.2 x shipping (cheapest way, unless specified otherwise)for whatever assemblies you want from it. Please email me off list and let me know what you need. FCFS I'm offering this to the list because I have enough going on and enough systems to restore to keep me busy for the next 10 years. Yes, I can probably find a keyboard and can also likely fix it, but I don't see anything wrong with some systems ending up as parts donors for others. I'll post to the list on the status of this as necessary. For shipping purposes, my zip is 15301. Bill Dawson whdawson(a)mlynk.com <mailto:whdawson@mlynk.com> ?