14 Feb
2002
14 Feb
'02
5:10 a.m.
Hey, Doc - off list to save everyone's bandwidth... What do you think to an
RS/6000 E30? I'm going to have a look at one tomorrow for not_much_money. I
have 2 questions - is it MCA or PCI?
And is the memory proprietary - or just standardish stuff?
Thanks in anticipation of your wise word :)
//Rich
14 Feb
14 Feb
5:43 a.m.
Richard.Sandwell(a)roebry.co.uk wrote:
Hey, Doc - off list to save everyone's bandwidth... What do you think to an
RS/6000 E30? I'm going to have a look at one tomorrow for not_much_money. I
have 2 questions - is it MCA or PCI?
And is the memory proprietary - or just standardish stuff?
Thanks in anticipation of your wise word :)
//Rich
Here are some rs6000 info links that might be of interest:
http://www.penncomputer.com/fo~1.htm
http://www.exquip.com/products/ibm/
http://www.wdpi.com/rs6000techtips/rs6000tt3.htm
Wish it was here in the US, I'd be interested in it also. My previous
foray
into MCA was less than successful. (BTW, it is PCI)
-nick
9:44 a.m.
On Thu, 14 Feb 2002 Richard.Sandwell(a)roebry.co.uk wrote:
Hey, Doc - off list to save everyone's bandwidth... What do you think to an
RS/6000 E30? I'm going to have a look at one tomorrow for not_much_money. I
have 2 questions - is it MCA or PCI?
And is the memory proprietary - or just standardish stuff?
I've never run or used one, so I don't have a first-hand opinion.
IIRC, all the 604 machines are PCI, and I'm sure the 7024s are.
If it says "RS/6000", you can bet big odds on proprietary memory.
Again, I don't know that first-hand, but I'd bet big odds.... Kingston
is a good reference for that. IBM still has the User Guide and the
Install & Service Guide up for that machine too.
http://www-1.ibm.com/servers/eserver/pseries/library/hardware_docs/sa38/380…
http://www-1.ibm.com/servers/eserver/pseries/library/hardware_docs/sa38/380…
Mind the line wraps.
I've heard they're nice mid-range boxes. I know they're very rarely
seen on the loose, which says a lot.
Doc
7:34 p.m.
On Thu, 14 Feb 2002 Richard.Sandwell(a)roebry.co.uk wrote:
Hey, Doc - off list to save everyone's
bandwidth... What do you think to an
RS/6000 E30? I'm going to have a look at one tomorrow for not_much_money. I
have 2 questions - is it MCA or PCI?
And is the memory proprietary - or just standardish stuff?
If I'm not quite mistaken, it's a 233MHz PowerPC 604e. Should be MCA.
Peace... Sridhar
8350
days inactive
8351
days old
3 comments
4 participants
participants (4)
-
doc＠mdrconsult.com -
oliv555＠arrl.net -
Richard.Sandwell＠roebry.co.uk -
vance＠ikickass.org