15 May
2002
15 May
'02
9:38 a.m.
What's everyone's thoughts on placing circuit
boards directly
on the bed of a scanner for imaging? Any possibility of damage to
the board from the light or other parts of the scanner? I've done it
before with good results but not with anything truly unique.
I've done it many times with great results. The only component I can think of that
may be an issue are old UV erasable EPROMS. I would imagine that the scanner lamp may put
out enough UV light to cause a problem.
_______________________________________________
cctech mailing list
cctech(a)classiccmp.org
http://www.classiccmp.org/mailman/listinfo/cctech
15 May
15 May
10:27 a.m.
No, even that is unlikely.
Scanner lamps do emit UV lights, but with so little energy (and,
generally, in the wrong wavelengths) that you can safely look into them,
with your bare eyes.
I have measured it once, you would need MONTHS of constant exposure to
cause an measurable effect.
ms
On Wed, 2002-05-15 at 20:38, pdp11(a)bellsouth.net wrote:
--
Michael Schneider email: ms(a)vaxcluster.de
Germany http://www.vaxcluster.de
Sieben auf einen Streich
_______________________________________________
cctech mailing list
cctech(a)classiccmp.org
http://www.classiccmp.org/mailman/listinfo/cctech
What's
everyone's thoughts on placing circuit boards directly
on the bed of a scanner for imaging? Any possibility of damage to
the board from the light or other parts of the scanner? I've done it
before with good results but not with anything truly unique.
I've done it many times with great results. The only component I can think of that
may be an issue are old UV erasable EPROMS. I would imagine that the scanner lamp may put
out enough UV light to cause a problem.
_______________________________________________
cctech mailing list
cctech(a)classiccmp.org
http://www.classiccmp.org/mailman/listinfo/cctech
8105
days inactive
8105
days old
1 comments
2 participants
participants (2)
-
ms＠silke.rt.schwaben.de -
pdp11＠bellsouth.net