IBM 3101 Dip Switches Configuration - test-drb@ccmp.vtda.org

24 Jan 2002

I have the "IBM 3101 Display Terminal Description" document. It's about
1/2" 
thick and has the technical specs, functional description, setup and 
configuration, interface wiring diagrams (not schematics), character maps, 
etc...

Normally, I'd offer it for free but since I'm recently umemployed, the new 
owner will have to buy me breakfast. $5.00 and it's yours!

If anyone wants it, contact me off list.

SteveRob

...
 From: Doc &lt;doc(a)mdrconsult.com&gt;
Reply-To: classiccmp(a)classiccmp.org
To: classiccmp(a)classiccmp.org
Subject: Re: IBM 3101 Dip Switches Configuration
Date: Thu, 24 Jan 2002 22:30:36 -0600 (CST)

On Thu, 24 Jan 2002, Dave McGuire wrote:

  On January 24, Doc wrote:
    If by "normal serial cable" you mean
a standard port-to-modem cable,
 that is most likely your problem.  You need to use a null-modem serial
 cable with a terminal. 
   That depends *completely* on the terminal.  Several even have both
 DTE- and DCE-wired connectors. 
   Oops.  My mistake.  I should have said "You need to use a null-modem
serial cable with an unmodified IBM 3101 terminal"

	Doc

_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com