On Sat, 9 Nov 2002 Qstieee(a)aol.com wrote: FYI, All monitors (should) have FOCUS and SCREEN adjustment pots on their flyback. As with anything else inside the monitor, don't just them unless you're certain you need to (adjusting focus is something I've only needed to do once on a monitor). They're sometimes labelled "F" and "S", sometimes unlabelled, but they should definately be located on the flyback transformer (the plastic thing that the thick HV cable for the anode connection comes out of). Also, you shouldn't need to adjust the pot very much, usually a small change makes a large difference in the focus of the monitor. But first: Also, beware that the dot pitch of the monitor can make things look out of focus, especially if you try using a resolution that's higher than the dot pitch supports. So, first, make sure you try a low, standard resolution (something like 800x600 or 640x480), the monitor may not be able to render the resolution you're trying clearly. Pat -- Purdue Universtiy ITAP/RCS Information Technology at Purdue Research Computing and Storage http://www-rcd.cc.purdue.edu http://dilbert.com/comics/dilbert/archive/images/dilbert2040637020924.gif