Cards and cables for old macs, are a couple of my main packrat categories. I have most of the special cables for Radius and Apple monitors, some SuperMac cables, and most of the Radius, Apple, SuperMac, and RasterOps video cards either used, or some new in the original sealed boxes. Many of the early devices though are FUSSY, specifically you often have to have the EXACT cable that matches your monitor. Sometimes you have to have the matching card as well, but often the newer Apple/Radius/etc cards would support older monitors if the proper cable is used (those darn monitor sense lines). With few exceptions all of the older video cards that do anything interesting break by OS 7.5 or 7.6, the control panels fail even earlier in many cases. A handfull of different Pivots were made, and without all the info on the back I can't really say if I have a cable that will work. Email me directly with the info and I will see if I have what you need, and give you an idea on which cards and/or builtin video will work. If you really want the pivot function in real time, I do have both LC PDS and Nubus Radius Pivot cards, but the control panels only work well with something like OS 7.1 or so.

Hi Claude, I'm in need of one or two 68040 CPUs - the plug-in type, 25 or 33Mhz. Need to upgrade a couple of LC475 / Performa475 (with 68LC040) to run Linux. Do you have any available for swap / sale? -- Bill Layer Sales Technician &lt;b.layer(a)vikingelectronics.com&gt; +----------------------------------+ Viking Electronics, Inc. 1531 Industrial St. Hudson, WI. 54016 - U.S.A 715.386.8861 ext. 210 <http://www.vikingelectronics.com> +----------------------------------+ "Telecom Solutions for the 21st Century" Powered by Slackware Linux 7.1.0