The picture's up. It's fairly big, but it was the best I could do with a
desktop scanner, and let the lables and everything still be readable. If
anyone has any info on this card, let me know.
BTW: The connectors for the HD have been cut off, because my scanner is
just a bit too small to scan a full-length card.
-Jason
***********************************************
* Jason Willgruber *
* (roblwill(a)usaor.net) *
* *
*
http://members.tripod.com/general_1 *
* ICQ#-1730318 *
************************************************
---------
Hi! I have an old Adaptec Hd controller that I'm trying to use in an IBM
PC (5150). Here's what it says on it:
adaptec, inc.
ASSY401406-00
REV K
I'm trying to find out how to get into the controller's BIOS so that I
can
set up the HD (using DEBUG). There's two jumper
blocks, and one single
jumper. I'm going to post a picture at:
<http://members.tripod.com/general_1/adaptec.jpg>
I'll try to get it posted in about 20 minutes.
ThAnX,
-Jason
***********************************************
* Jason Willgruber *
* (roblwill(a)usaor.net) *
* *
*
http://members.tripod.com/general_1 *
* ICQ#-1730318 *
* /0\/0\ *
* > Long Live the 5170! *
* \___/ *
************************************************