________________________________________ From: cctalk [cctalk-bounces at classiccmp.org] on behalf of Noel Chiappa via cctalk [cctalk at classiccmp.org] Sent: Sunday, March 5, 2017 12:05 PM To: cctalk at classiccmp.org Cc: jnc at mercury.lcs.mit.edu Subject: Re: PDP-11/34 rails? Ah, right you are - brain fade, late at night. I went looking in my BA11-K collection, and found a couple that do have the rotate - the part that bolts to the box has a huge 3/4 circular plate, and a metal strip that runs to the front of the box with a huge (~3") handle bar at the front, which releases it to turn. I have this bit set that the outer slides (the parts that bolt to the 19" rack) are the same for the rotating inners, and the non-rotating ones (as used on, e.g., the RK05 and the BA11-F). I went and had a look at some, but there is no name, or number, anywhere on them. BTW, these also rotate. ________________________________________ It's sad and too late now but a few years ago when I was leaving the old house I couldn't give that stuff away. I had 4 complete sets of rails for BA-11's that went to the recycler because I couldn't find anyone to take them. Also a bunch of those funny rails for RL drives. bill