My board says simply "M8190", the etching
says "M8190", part number is
"5016017-01-D1-P3", etch also says "KDJ11-B CPU", there are 3x 28-pin
ROM
sockets on the left hand side, 1x 40-pin on the top right, all empty.
Without any rev letters after the M8190, what you've got is
almost certainly the old 15MHz non-FPA-capable KDJ11B. Probably
very similar to the CPU in the Micro-11/73 you got from SERF at UBC.
(Or, at least I think like the Micro-11/73 I seem to recall you
getting from SERF. There was a Micro-11/23 and a KA650 in a BA23
I also seem to recall...)
Tim.