14 Sep
2021
14 Sep
'21
12:21 a.m.
Hey all,
According to
http://bitsavers.trailing-edge.com/pdf/hp/9000_200/9000-200_periphSupp_Dec8…
(see PDF page 2), it seems as if HP-UX 5.1 should work on the 9000/217.
http://hparchive.com/Catalogs/HP-Catalog-1986.pdf also seems to confirm
this (PDF page 71 under Series 200 Bundled Systems, it's mentioned that
the Model 217 can run single-user HP-UX). However, there seems to be
conflicted information based on people that I've talked to and the
hpmuseum page with a copy of HP-UX 5.1 whether it should work at all,
whether 5.1 is a unified release where the boot floppy should work on
both series 200 and 300, or whether there's another boot floppy for
series 200 which apparently has not been archived.
I recently obtained a Model 217 and would like to know if anyone has
more info on this, the two people that I know of that have tried it get
a hang on boot.
Thanks,
Larkin
23 Sep
23 Sep
2:29 a.m.
On 2021-09-13 9:21 p.m., Larkin Nickle via cctalk wrote:
Hey all,
????According to
http://bitsavers.trailing-edge.com/pdf/hp/9000_200/9000-200_periphSupp_Dec8…
(see PDF page 2), it seems as if HP-UX 5.1 should work on the
9000/217. http://hparchive.com/Catalogs/HP-Catalog-1986.pdf also seems
to confirm this (PDF page 71 under Series 200 Bundled Systems, it's
mentioned that the Model 217 can run single-user HP-UX). However,
there seems to be conflicted information based on people that I've
talked to and the hpmuseum page with a copy of HP-UX 5.1 whether it
should work at all, whether 5.1 is a unified release where the boot
floppy should work on both series 200 and 300, or whether there's
another boot floppy for series 200 which apparently has not been
archived.
????I recently obtained a Model 217 and would like to know if anyone
has more info on this, the two people that I know of that have tried
it get a hang on boot.
Thanks,
Larkin
It would seem likely that there is a separate boot diskette for 200
series machines that so far no one has found a copy of.? The only thing
I succeeded in booting the 5.1 that is available on hpmuseum.net is a
310.? I tried booting it on a 9920 with a 68010 processor card and got
the same result it posts the starting message and then hangs.
Paul.
30 Sep
30 Sep
11:03 a.m.
The version for 200 series is called 5.17
Good luck finding it?
On Thursday, September 23, 2021, Paul Berger via cctalk <
cctalk at classiccmp.org> wrote:
On 2021-09-13 9:21 p.m., Larkin Nickle via cctalk wrote:
Hey all,
According to http://bitsavers.trailing-edge
.com/pdf/hp/9000_200/9000-200_periphSupp_Dec89.pdf (see PDF page 2), it
seems as if HP-UX 5.1 should work on the 9000/217.
http://hparchive.com/Catalogs/HP-Catalog-1986.pdf also seems to confirm
this (PDF page 71 under Series 200 Bundled Systems, it's mentioned that the
Model 217 can run single-user HP-UX). However, there seems to be conflicted
information based on people that I've talked to and the hpmuseum page with
a copy of HP-UX 5.1 whether it should work at all, whether 5.1 is a unified
release where the boot floppy should work on both series 200 and 300, or
whether there's another boot floppy for series 200 which apparently has not
been archived.
I recently obtained a Model 217 and would like to know if anyone has
more info on this, the two people that I know of that have tried it get a
hang on boot.
Thanks,
Larkin
It would seem likely that there is a separate boot diskette for 200 series
machines that so far no one has found a copy of. The only thing I
succeeded in booting the 5.1 that is available on hpmuseum.net is a 310.
I tried booting it on a 9920 with a 68010 processor card and got the same
result it posts the starting message and then hangs.
Paul.
26 Sep
26 Sep
8:49 p.m.
5.1 installation diskettes from bitsavers and hpmuseum are labeled "series
300", we should try to locate the correct release (I also have 217 without
software).
Regards,
Plamen
On Tue, Sep 21, 2021 at 8:06 PM Larkin Nickle via cctalk <
cctalk at classiccmp.org> wrote:
Hey all,
According to
http://bitsavers.trailing-edge.com/pdf/hp/9000_200/9000-200_periphSupp_Dec8…
(see PDF page 2), it seems as if HP-UX 5.1 should work on the 9000/217.
http://hparchive.com/Catalogs/HP-Catalog-1986.pdf also seems to confirm
this (PDF page 71 under Series 200 Bundled Systems, it's mentioned that
the Model 217 can run single-user HP-UX). However, there seems to be
conflicted information based on people that I've talked to and the
hpmuseum page with a copy of HP-UX 5.1 whether it should work at all,
whether 5.1 is a unified release where the boot floppy should work on
both series 200 and 300, or whether there's another boot floppy for
series 200 which apparently has not been archived.
I recently obtained a Model 217 and would like to know if anyone
has
more info on this, the two people that I know of that have tried it get
a hang on boot.
Thanks,
Larkin
1475
days inactive
1491
days old
3 comments
3 participants
participants (3)
-
me＠larbob.org -
phb.hfx＠gmail.com -
plamenspam＠afterpeople.com