----- Original Message -----
From: <sms(a)antinode.org>
To: <SIPKE(a)wxs.nl>
Sent: Saturday, April 08, 2000 6:27 PM
Subject: no chars on uVAX console
Is that the speed selected by the rotary switch on
the console
bulkhead?
Yep
I've removed all boards save the memory boards (2*M7609)
and the CPU (M7606-AA)
Now I get characters (XON/OFF = on) and the bootprocess continues
until char 3
I've tried to put some of the boards back but I am not sure if I have a
missing
board.
Het boards were arranged as follows
slot 1 ----------------M 7606------------------
slot 2 ----------------M 7609------------------
slot 3 ----------------M 7609------------------
slot 4 -----M7516-------- (empty)
slot 5 -----M7555-------- ------M7546------
slot 6 (empty) ---Dilog sq703a---
The uVAX used to contain a Serial concentrator or something
like it but that was removed, propably from one of the
empty slot positions.
I've gathered that the first 4 slots are different from the rest of
the BA123, those beeing true Qbus 22 slots.
Should I rearrange the boards ? If so what do you suggest?
Sipke de Wal