19 Apr
2021
19 Apr
'21
9:33 a.m.
Sort of an odd request, but I have some LK201-AA keyboards that have (of
course) not got their little black riser feet any more. I don't think
they've ever had them while in my possession, in fact.
If anyone has one, and has the time and interest, could you do me a big
favor and take measurements of them for me? I would like to 3D print
some replacements, so getting the outer dimension is the most critical
part (though I can always measure the inner dimension of the hole they
fit into, too), along with the protrusion of the two clips that fit into
the key of the hole on the bottom of the LK201 keyboard.
I have good pictures of them, just not dimensions, so I think once I
know the size of the critical bits, designing and printing them
shouldn't be too difficult.
Thanks,
-Seth
--
Seth Morabito
Poulsbo, WA, USA
web at loomcom.com
19 Apr
19 Apr
9:47 a.m.
On Mon, Apr 19, 2021 at 09:33:42AM -0700, Seth J. Morabito via cctalk wrote:
Sort of an odd request, but I have some LK201-AA
keyboards that have (of
course) not got their little black riser feet any more. I don't think
they've ever had them while in my possession, in fact.
If anyone has one, and has the time and interest, could you do me a big
favor and take measurements of them for me? I would like to 3D print
some replacements, so getting the outer dimension is the most critical
part (though I can always measure the inner dimension of the hole they
fit into, too), along with the protrusion of the two clips that fit into
the key of the hole on the bottom of the LK201 keyboard.
I have good pictures of them, just not dimensions, so I think once I
know the size of the critical bits, designing and printing them
shouldn't be too difficult.
I have one (yes, one) of these little feet. Let me see if I can find
it...
Cheers,
Malte
--
Malte Dehling
<mdehling at gmail.com>
11:14 a.m.
Malte Dehling <mdehling at gmail.com> writes:
On Mon, Apr 19, 2021 at 09:33:42AM -0700, Seth J.
Morabito via cctalk wrote:
I have one (yes, one) of these little feet. Let me see if I can find
it...
Thanks Malte, I appreciate it!
Cheers,
Malte
-Seth
--
Seth Morabito
Poulsbo, WA, USA
web at loomcom.com
6:19 p.m.
Height 27.38 mm (1.07 in)
Diameter 13.36 mm at the base (closed end), 13mm at the open end (hard
to measure as it's easily deformed).
Ear slots 5.5 mm wide
Ears 2.17 mm wide, 11.3 high (the tooth-shaped part only).
??? -Rick
On 4/19/2021 2:14 PM, Seth J. Morabito via cctalk wrote:
Malte Dehling <mdehling at gmail.com> writes:
On Mon, Apr 19, 2021 at 09:33:42AM -0700, Seth J.
Morabito via cctalk wrote:
I have one (yes, one) of these little feet. Let me see if I can find
it...
Thanks Malte, I appreciate it!
Cheers,
Malte
-Seth
24 Apr
24 Apr
5:39 p.m.
On Mon, Apr 19, 2021, at 6:19 PM, Rick Murphy via cctalk wrote:
Height 27.38 mm (1.07 in)
Diameter 13.36 mm at the base (closed end), 13mm at the open end (hard
to measure as it's easily deformed).
Ear slots 5.5 mm wide
Ears 2.17 mm wide, 11.3 high (the tooth-shaped part only).
??? -Rick
Thanks so much, Rick, I greatly appreciate it! I'm going to try building one in
OpenSCAD and printing them out. I'll let the list know how it goes.
-Seth
--
Seth Morabito
Poulsbo, WA
web at loomcom.com
25 Apr
25 Apr
2:09 a.m.
If it?s of any assistance, i have one too. I see you have measurements, but here?s some
photo?s which may also help
https://imgur.com/gallery/jWIR3F2
Cheers,
Josh Rice
On Apr 25, 2021, at 1:39 AM, Seth Morabito via cctalk
<cctalk at classiccmp.org> wrote:
On Mon, Apr 19, 2021, at 6:19 PM, Rick Murphy via cctalk wrote:
Height 27.38 mm (1.07 in)
Diameter 13.36 mm at the base (closed end), 13mm at the open end (hard
to measure as it's easily deformed).
Ear slots 5.5 mm wide
Ears 2.17 mm wide, 11.3 high (the tooth-shaped part only).
-Rick
Thanks so much, Rick, I greatly appreciate it! I'm going to try building one in
OpenSCAD and printing them out. I'll let the list know how it goes.
-Seth
--
Seth Morabito
Poulsbo, WA
web at loomcom.com
27 Apr
27 Apr
3:16 p.m.
Thanks to all the help from this list, I've been able to successfully print some
replacement feet for my LK201 keyboards. For anyone interested, the model is now on
Thingiverse, here: https://www.thingiverse.com/thing:4841952
It's not a 100% perfect match by any means, but it's "Good Enough" to
get the job done. The fit is snug and solid. I could wish that the clips were a little
less brittle, but that's the nature of 3D printing with very small layers.
-Seth
--
Seth Morabito
Poulsbo, WA
web at loomcom.com
28 Apr
28 Apr
6:13 a.m.
On Tue, 27 Apr 2021, Seth Morabito via cctalk wrote:
Thanks to all the help from this list, I've been
able to successfully
print some replacement feet for my LK201 keyboards. For anyone
interested, the model is now on Thingiverse, here:
https://www.thingiverse.com/thing:4841952
It's not a 100% perfect match by any means, but it's "Good Enough" to
get the job done. The fit is snug and solid. I could wish that the clips
were a little less brittle, but that's the nature of 3D printing with
very small layers.
Seth, if you print those in PETG or ABS, you'll get the flexibility that
you want.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://scarlet.deltasoft.com - Get it _today_!
1334
days inactive
1343
days old
7 comments
5 participants
participants (5)
-
geneb＠deltasoft.com -
mdehling＠gmail.com -
Rice43＠btinternet.com -
rick＠rickmurphy.net -
web＠loomcom.com