I'm working on documenting these supplies, since there seems to be almost nothing on them on the web of use. There is a list of what is on the 9 pin molex on the SM, but no actual pinout. Same for the 15 pin D on the MMA, but at least there are enough pictures around to be able to assume the sense lines are on 1 and 2. The general form of the part numbers for them starts with 2 or 3 letters (TM,MM,MMA,SM) a rough power rating code (1-7) and the number of outputs (1-5) a dash, then model number probably encoding supply outputs/amps. This is based on looking at a bunch of eBay pictures. They want waaaay too much money for them on there. This all started because I need to fix the MM72s for the Alto. I got the four I took a look at fixed by replacing all of the 19000uF/7.5v caps. All of them were dried out. Not a huge surprise since they were from around 1978. Measured the rest of the caps in them with an in circuit capacitance/ESR meter and they were all reasonable, even the 1400uf/200v ones, which I had some spares for, but are much harder to find in the right size than the 19mF ones. Switching supplies from the mid 70's are NOISY (10-20mV on all four supplies)