It's an enhnaced server 9595, power supplies always show on ebay. The
complex on it is worth quite a bit of money for both the server 500 and
server 95 crowd. It will run Linux, Novell, NT4 server, etc. For $10 initial
cost it's worth locating a powers upply even if for $50.
Not sure if there's a manuall for the 500 but you might check here for a
manual (others should bookmark it for future IBM laptop, PS/2, server, etc
use)
http://www.pc.ibm.com/us/cdt/hmm.html
Also you might want to subscribe to and ask on the COMP.SYS.IBM.PS2.HARDWARE
newsgroup for info on this machine and parts that others might have around.
=> -----Original Message-----
=> From: owner-classiccmp(a)classiccmp.org
=> [mailto:owner-classiccmp@classiccmp.org]On Behalf Of PC Automation
=> Sent: Sunday, February 17, 2002 11:24 PM
=> To: classiccmp(a)classiccmp.org
=> Subject: IBM Server 500
=>
=>
=> I purchased an IBM Server 500 series computer yesterday at a
=> yard sale for
=> only $10.. It's a pentium 90 with 64 RAM, CDROM, 2.88 Floppy
=> drive, and (5
=> ea. ) 2.25 Gig Wide SCSI-2 hard drive in it. It's a very big
=> case that holds
=> a total of 12 SCSI drives, and a mix of other things.
=> When I got it home I power it up and it booted up up nicely with a Novel
=> 3.12 OS (100) user licence. I was thrilled until the power
=> supply made a pop
=> and , a small Cap must have blown. and now it has no power.. I would have
=> loved to use this as a home server, but I really don't have the
=> knowledge to
=> repair the PS and I really see no real value in this machine
=> other than it's
=> 5 SCSI-2 Wide Hard Drives.. Any Ideas from the experts here.. ??
=> Phil..
=>