22 Oct
2006
22 Oct
'06
8:58 p.m.
On Saturday 21 October 2006 23:19, you wrote:
Esteemed DEC Wizards,
I'm trying to format a Seagate ST251-1 (40 MB MFM drive) connected
to an RQDX3 using ZRQCH0 from XXDP25. The formatter runs for over
two minutes, stepping the heads steadily, and announcing completion
of over 50,000 LBNs written. It seems to write all of the low level
format, then dies with this error:
ZRQC SYS FTL ERR 00007 ON UNIT 00 TST 01 SUB 000 PC: 105472
Controller has reported a fatal error in the format program
Status: FCT nonexistent
The drive was originally used with WD controllers on 486 class MS-DOS
machines.
How do I get an FCT onto the drive? Do I need to somehow wipe some
additional space on the drive to trick ZRQC into thinking this is a
raw drive, or something?
Thanks,
be sure to answer:
auto format mode = No
use RCT = No
manufacturing bad block information = No
downline load UIT = Yes
continue if bad block information is inaccessable = Yes
you should be good to go...
joe lang