23 Feb
2007
23 Feb
'07
11:48 p.m.
On 24 Feb 2007 at 1:16, Jim Leonard wrote:
It's disk change--but the PC5 should be blind to it. Another
possibility is that the PC5 might require a READY\ signal, which was
supplied on the same pin. I'm just not familiar with the ins and
outs of the PC5. Regardless, there's no difference between recording
on 720K and a 5.25".360K. I'd inspect jumpers first, then see if
pin 34 on the cable goes anywhere.
Cheers,
Chuck
Try masking
off pin 34.
Why would that make a difference, if Chuck does the former routinely?
What does pin 34 do?