I have a VT320, but I didn't attempt to use it. It only has a RJ
connector on the back, an I don't have anything to plug into it. I was
using a terminal program on a PS/2 while trying to connect to the
PDP11/53.
Chad Fernandez
Michigan, USA
Tom Uban wrote:
Another thing to try is to be sure that your terminal is working properly.
Be sure that with the cable attached to the terminal and disconnected from
the 11/53 there is no echo of characters typed at the terminal and when pins
2 and 3 are shorted together on the cable end that would attach to the 11/53
the terminal does echo back to itself. If this does not work, then you have
not properly faked out the modem control signals that the terminal requires
to work.
--tom