10 Mar
2011
10 Mar
'11
5:47 a.m.
--- On Wed, 3/9/11, Hollandia at ccountry.net <Hollandia at ccountry.net> wrote:
The motherboard has provision for an off-board
battery. I
am thinking of
using a socketed CR2032 battery which I believe is rated at
3 volts. The
manual for the computer describes the off-board battery as
3.6 volts.
Is it asking for trouble to use a 3v rather than a 3.6v
battery? If so,
where are the 3.6v batteries available?
I've used CR2032's as replacements before on similar machines, it's worked
fine.
Just remember - whatever you do, REMOVE the old soldered in battery from the board.
It'll leak and corrode through traces. I've desoldered them and installed CR2032
sockets in their place with good success. But if you don't want to go to the trouble,
you can just clip off the old battery.
-Ian