7 Sep
2015
7 Sep
'15
8:22 a.m.
Its got a PMAGB-B fitted in Turbochannel slot1 as per the 3000 600 user
guide page 2-12 fig 2-8
Regards Rod
On 07/09/2015 14:48, Mark Wickens wrote:
I was quite surprised about 8.3 supporting the DEC
3000/600 AXP,
however looking at the Quickspecs you appear to be right.
http://www8.hp.com/h20195/v2/GetPDF.aspx%2Fc04154442.pdf
However, I don't see any Turbochannel graphics adapters listed as
supported, only the following:
Graphics Options
PBXGK
ELSA/GLoria Synergy+ graphics option that provides 2D acceleration for
supported PCI-based
Alpha Workstations and Servers.
PBXGD
PowerStorm 300/500 graphics option that provides 3D acceleration or 3D
acceleration with
stereo viewing capabilities for supported PCI-based Alpha Workstations
and Servers.
PBXGF
3DLabs OXYGEN VX1 graphics option that provides 2D acceleration for
supported PCI-based
Alpha Workstations and Servers.
PBXGG
ATI RADEON 7500 2D and 3D, PCI and AGP graphics option
So you might be out of luck on that front.
Mark.
On 07/09/15 10:16, Rod Smallwood wrote:
I thought it might be nice to have a DEC based
graphics work station.
I had the Alpha, a high res monitor and the Hobbyist Media CD for
ALPHAVMS 8,3. (yes the system supports 8.3)
SFSG .. So CD in the drive and switch on. First a nice colour
graphics demo/test.
Then the nomal system level stuff. >>> prompt, enter SHO DEV and our
CD drive shows as DKA400 just where it should be.
So Boot DKA400: and off we go. After a while a menu appears from
which you can load layered products you need.
It gets part way through the load and falls over with a data error.
The cd is a real bought and paid for Media CD and is not a copy.
Before I do a lot of tedious emaling (HP have taken the Hobbyist
program in house) has anybody successfully loaded an Alpha with
ALPHA VMS 8.3?
Regards
Rod