5 Feb
2009
5 Feb
'09
11:28 a.m.
On Thu, Feb 5, 2009 at 1:47 PM, <tiggerlasv at aim.com> wrote:
I can't speak towards the older, larger Unibus models,
such as the 11/45, 11/55, 11/60, and 11/70.
However, these models generally had a standard 115volt line cord:
11/02 11/03 11/23 11/23+ 11/24
11/34 11/34a 11/44 11/53 11/73
11/83 11/84 11/93 11/94
If it's in a rack, it MAY have a power distribution module
at the base, with a 20-amp or 30-amp power cord, but
in most (if not all) cases, the individual chassis inside the rack
will have standard 115volt line cords that plug into it.
My Unibus machines are racked, not loose, but I _thought_ that the
11/44 and perhaps the 11/24 had a 20A 115V plug (i.e. -- | vs |
| ). Mine go into a power distribution box at the bottom of the rack
and I haven't unplugged them in a long time, but that's what I recall.
Little stuff like the 11/34 and 11/04 in BA-11s use "standard" US 15A
110V plugs, though, as would anything in a BA23 (Qbus, large and
small). I don't know anything about the newer stuff after the 11/73,
though.
-ethan