10 Apr
1998
10 Apr
'98
9:38 p.m.
Wirehead Prime wrote:
snip
What's the deal? I've got the drive jumpered
to DS1. I have a suspicion
I'm being extremely ignorant about something here. What would cause the
described behavior?
Anthony Clifton - Wirehead
IF the drive selection posibilities are 1, 2, 3, 4, then you have the
right selection.
IF on the other hand, the selection possibilities are 0, 1, 2, 3. Then
you will need to select drive 0.
Theese are both assuming that your 'floppy cable' does NOT have a
'twisted' section between the 1st and 2nd drive connectors, AND that you
are plugging in to the connector closest to the 'feed' end (I.E. the
'first drive')
If you are connecting your drive to the end connector of a 'cable with a
twist', then you should have the drive jumpers set for #2 of 1-4, or #1
of 0-3.
Chuck
--
-----------------------------------------------------------
He, who will not reason, is a bigot; William Drumond,
he, who cannot, is a fool; Scottish writer
and he, who dares not, is a slave. (1585-1649)
While he that does, is a free man! Joseph P. 1955-
-----------------------------------------------------------
Chuck Davis / Sutherlin Industries FAX # (804) 799-0940
1973 Reeves Mill Road E-Mail -- cad(a)gamewood.net
Sutherlin, Virginia 24594 Voice # (804) 799-5803