20 Mar
2005
20 Mar
'05
10:24 a.m.
On Sun, 20 Mar 2005 14:50:54 -0000, Antonio Carlini
<a.carlini at ntlworld.com> wrote:
Err...you would have a case handy would you? :-}
Yeah I have the KRQ50...
Do you have the pinouts of the LMS interface connectors (10pin and
16pin) behind the CD?
/wai-sun
Well the caddy is supposed to be a beige plastic
"antlers" AND a
transparent plastic "case". If you only have one part, maybe that's
your problem.
Yeah I'm caseless..... :-(
IIRC to insert the disc (which is held by the "antlers" inside
the "case" you push the "case" into the drive "antlers"
first.
Then you withdraw the "case" and the "antlers" + CD stay inside.
Hmm...the antlers/CD were jammed inside with the antlers facing the
frontpanel/user...
The "antlers" have DATA written on one side - the CD data (non-label)
side has to be on this side. The case is inserted with the CD label
side uppermost.
Yup I saw that.
As the Haynes manual would say, "Extraction is the reverse of the
above"
There are two LEDs on the front. The lower one indicates power present,
the other indicates a CD inserted.
Power LED is fine.
I can get the CD present LED to light up but manually inserting the CD
in, so sensors should be OK.
Anyway, my RRD40 I discovered unfortunately was
nonfunctional *sigh*
:-{
From your description, you are obviously missing a case. p.s. I had hopes for the RRD40 to be a boot
device for my u/VAXen...
If you have nothing faster (TU56, paper-tape etc. :-)) then it will
happily work as a boot device for MicroVAX 3100 systems. It would
probably work for MicroVAX I/II systems as well, if you have an
appropriate interface card (either Qbus SCSI or a KRQ50).