25 Feb
2011
25 Feb
'11
8:17 p.m.
On 2/23/2011 11:02 AM, Tony Duell wrote:
Affirmative. Clips removed, etc.
Hey, just reporting on what I'm seeing :). Perhaps both the controller
and the membrane have got something wrong with them.
At any rate, I dropped by a local recycler (RE-PC in Tukwila, WA) and
they had a box of LK201s for $5 each. I picked up a few just to be on
the safe side :).
Everything seems to be working fine now, just need to get VMS up and
running...
Thanks all for the help!
Josh
I just got
done trying this. No dice, with the membrane disconnected 3
of the LEDs light up constantly and that's it (no beeps or anything
You did
remove the metal clips from the PCB and not just pull out the
membran tails I trust. If you do the latter, said clips short all the
pads togther and cause all sorts of problems. else). With
the membrane connected I get 4 LEDs and a few very short
(shorter than I recall under normal circumstances) beeps. So perhaps
the membrane isn't to blame in this case.
Thsi, AFAIK, makes no sense. A
correctly working membrane assembly is
open-circuit between all conenctions. So the cotnroller PCB can't tell
whether it's connected or not.