9 Nov
2007
9 Nov
'07
2:57 p.m.
Probably a Tektronix 4132. These were UNIX workstations based on the
National 32016 CPU, running a derivative of Berkeley 4.2 UNIX. The
4132 had a built-in Wangtek QIC-24 drive, with a special interface board
(QIC-24 on one end, and SCSI on the other end) made by Adaptec that
allowed the drive to sit on the built-in SCSI bus.
These drives would use DC300-A tapes. I believe that DC600's would also
work, but there were occasional issues with the tapes getting tangled
because of the much thinner tape in the DC600 cartridges.
Rick Bensene
The Old Calculator Museum
http://oldcalculatormuseum.com
-----Original Message-----
From: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck Guzis
Sent: Friday, November 09, 2007 10:24 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Tek 405x tape drives
On 9 Nov 2007 at 10:09, Al Kossow wrote:
The tape drive in a 405x predates QIC. The head
is fixed in
place and
uses one track for clock and one for data. It is
more similar to
digital cassettes than the later QIC drives.
The drive I have is a Wangtek 54590, circa 1983 and the head
assembly is definitely on a stepper. I wonder what piece of
Tek gear it's from then?
Cheers,
Chuck