On Friday 16 May 2008 12:22, Ade Vickers wrote:
Right, I've now multimetered the voltages, and:
The 12v line is running at 12.74v
The 5v line is running at 5.40v
A little high in both cases.
I didn't check the -13v line
I took readings from a couple places: Straight off the PSU plug, and in the
case of the 12v, at the monitor plug.
I wasn't sure about the 5v; I took a reading across each of the 8132 chips,
getting 4.14v and 4.16v; but I guess those may not be meaningful as the
chip itself will be taking some of that power.
8132 chips?
That's *definitely* too low, if it's supposed to be +5V. Enough to cause the
logic to act quite strangely...
--
Member of the toughest, meanest, deadliest, most unrelenting -- and
ablest -- form of life in this section of space, ?a critter that can
be killed but can't be tamed. ?--Robert A. Heinlein, "The Puppet Masters"
-
Information is more dangerous than cannon to a society ruled by lies. --James
M Dakin